home » Blog » MV-105 Armored Cable: All Need to know

MV-105 Armored Cable: All Need to know

Jun 11,2022

mv-105 armored cable is the standard cable for medium voltage power distribution in campus, industrial, commercial, and utility applications. This cable combines two or more types of conductors under a single overall jacket. In addition to the armor of mv-105 armored cable provides a full metallic enclosure that protects against mechanical abuse, impact, and crushing. If you are looking for an efficient and high-performance option for your electrical wiring needs, then consider mv cable.

mv-105 armored cable is the standard cable for medium voltage power cable

MV-105 armored cable is the standard cable for medium voltage power distribution in campus, industrial, commercial and utility applications. It is also a dual-rated tray cable because it can be used in both indoor and outdoor environments for indoor installation if properly sealed. The MV-105 armored cable consists of four concentric conductors twisted together with an aluminum or polyethylene insulation. The four conductors are insulated by overlapping materials; polyethylene (PE) or cross-linked polyethylene (XLPE) armor strands are bonded to the PE or XLPE insulations at regular intervals along the length of the conductor bundle by means of mechanical fusion or heat fusion methods.

mv-105 armored cable is a dual-rated tray cable

As a dual-rated tray cable for medium voltage, the mv-105 armored cable is suitable for use on equipment located in hazardous environments where there is a possibility of electrical arc or leakage current. For example, mv-105 armored cable may be installed as an equipment grounding conductor on remote terminal units (RTUs) and other such devices. The minimum bend radius for this product is 12 inches.

The primary purpose of using mv-105 armored cable to ground your RTUs and other electronics is a safety precaution. It ensures that no electric shock will occur if you accidentally come into contact with one of the wires inside this type of wiring system. If someone were to touch one of these wires while it was live (i.e., when electricity was flowing through it), they could get electrocuted or experience some other serious injury because they did not have any protection from it while working on their project at home or at work! This would also prevent any fires from starting due both static discharge as well as arcing (sparking) between circuits which could cause damage over time as well!

The mv-105 armored cable provides a full metallic enclosure that protects against mechanical abuse, impact, and crushing.

The mv-105 armored cable is a heavy-duty, flexible, and rugged cable that can be used in military, industrial or commercial applications. The mv-105 armored cable provides a full metallic enclosure that protects against mechanical abuse, impact, and crushing.

The mv-105 armored cable consists of six individually insulated wires within an outer jacket of tough but flexible PVC insulation. The PVC insulation is covered with a heavy-duty steel wire braid shield as well as an outer PVC jacket. The shielded conductors are connected to the terminals on each end of the cable by means of metal crimp lugs or solderless terminals which provide excellent electrical connections between the conductors and their respective terminal contacts.

The mv-105 armored cable has been designed to operate at temperatures ranging from -20°C (-4°F) to +60°C (140°F). This flexibility allows for use in virtually any climate or environment without compromising your equipment performance or reliability.

The mv-105 armored cables have been tested under extreme conditions using UL 569 and CSA 22.2 No 2 standards for flame resistance (FT1) for 600 seconds at 25 mm (1″) from the ignition source, without evidence of ignition or fire propagation from direct flame imping

mv-105 armored cable application

MV-105 armored cable is recommended for use in control circuits in machine tools, motor control centers and heavy duty industrial applications at temperatures not to exceed 90°C in dry locations or 75°C in wet locations.

The mv-105 armored cable provides a full metallic enclosure that protects against mechanical abuse, impact, and crushing. MV-105 armored cables are available with either EPR or PVC insulation options. The cable conductors are tinned copper for excellent corrosion resistance; the overall jacket material is cross-linked polyethylene (XLPE) insulation with ethylene tetrafluoroethylene (ETFE) inner layer for superior chemical resistance properties.

mv-105 armored cable

Choose of mv 105 armored cable

With the increasing demand for armored cable, it is a good time to select the best-armored cable.

Armored cables are widely used in military and civilian applications such as underground power transmission and communication lines.

The armored cable can be divided into two categories: single conductor and multiconductor. The single-core armored cable can be further divided into two types: copper and aluminum.

Copper armored cables are widely used in automotive, industrial, and home appliance industries due to their excellent heat resistance performance and high flexibility and ductility.

ZWMVCABLE also provides a variety of different kinds of insulating materials for different insulation requirements, such as 5kv cable, 15kv cable, and 66kv cable which can not only meet customers’ strict requirements on insulation performance but also protect the wire from corrosion during long-term use.

Conclusion

The mv-105 armored cable is designed for use in control circuits in machine tools, motor control centers, and heavy-duty industrial applications at temperatures not to exceed 90°C in dry locations or 75°C in wet locations. The armor of mv-105 armored cable provides a full metallic enclosure that protects against mechanical abuse, impact, and crushing. mv-105 armored cable is the standard cable for medium voltage power distribution in campus and industrial.

Leave message to us!





Related posts